Photo 2005

Clarion service – contact Warren Bennett 021 02396460 and/or the new distributor Stretch Master 09 2716230 for Sales and Service.

Order Office

KNOLL Home A/V Multi Room Systems

PLEASE USE BROWSER BACK ARROW TO RETURN AFTER PRINTING PRICE LIST

However prices, where shown on overseas links / sites, are the recommended prices in that country’s currency and generally bear no resemblance to the recommended prices in New Zealand. This is due to changing currency conversions, different tax structures, international freight costs, local specification requirements etc, all this effecting our imported products pricing differently.

• Knoll Product – MVP44a, MVP64a, 4K, 6K
• Knoll Home Page
• Download, Print RRP List
• Info – Search – RRP’s

No 2 Whitaker Place off Symonds St at the Airedale, Wakefield St’s Traffic Lights. To see Street Location Map “Click” Download File
Download file

Fifty meters up from a new restaurant and within a few blocks are several more. Pay and Display Street parking 9:00 to 17:00 Mon to Frid then Free.

The Studio is 5H and it’s Windows are those directly above the Main Entrance.

Down the Ramp from the Footpath to the Covered Main Entrance.

Security “Codded” Main Doors. Cast Ali. Secure Mail Boxes.

Inside the Lobby with access to Lifts and Stairs.

Two Lifts service the Accomadation Floors and the Lower Car Parks and Rubbish Bins. Often Car Parks become available from other Owners.

Out of the Lift or Up one Floor by Stairs, down a short Hall to 5H on the left.

Open the door – Kitchen left, lounge – dining ahead, bed far left on to shower room.

Kitchen – Fridge / Freezer, Waste Desposil sink, Elec. Stove / Oven, Extractor.

Looking along the Ramp to Whitaker Plc past the University Car Park.

Looking out the Large Sliding Windows past the University Car Park to Symonds St.

Dining Table and 4 chairs with fold out couch for over night guest.

View from Bed and Shower room doorway. Wardrobe and TV, Stereo gear.

View from dining area of double bed, TV etc, wardrobe and cabinet, Shower room doorway.

Just through the shower room doorway – Cloths washer and dryer.

Shower, hand basin with toilet behind the door to the left.

Enquire:- Robin H Wood ++64 021 325 523 or 09 849 3132 Ext 6 ]]> http://www.woodelectronics.co.nz/studio/feed/ 0 http://www.woodelectronics.co.nz/contact/ http://www.woodelectronics.co.nz/contact/#comments Tue, 07 Aug 2007 14:40:46 +0000 reganjcunliffe http://www.planetav.co.nz/?p=12 Telephone: +64 9 836 8207 Facsimile: +64 9 836 8207 Street Address: 7/15 Heremai St,
Hendeson,
Auckland. Postal Address: 7/15 Heremai St
Waitakere 0162
New Zealand.

Key Personnel

Other

• Bank : ASB Bank Ltd., East Auckland. Account : 12-3110-0055145-00
• Accountant : Paul S Harrop (Harrop and Co, +64 9 303 4329)
• Solicitor : Bob N Burnes (Robert Burnes and Associates, +64 9 379 8811)
]]> http://www.woodelectronics.co.nz/contact/feed/ 0 http://www.woodelectronics.co.nz/product-search/ http://www.woodelectronics.co.nz/product-search/#comments Wed, 16 Aug 2006 18:17:05 +0000 robin http://www.woodelectronics.co.nz/product-search/ All Brands - ‘Click’ ‘LIST OF GROUPS’, scroll to the required ‘Brand – Group’, ‘Click’ and this will show available Products with RRP’s.
• Change or Specify Brand - Type the Brand name into the Box and ‘Click’ ‘SEARCH’. This will list all groups for that Brand. ‘Click’ required ‘Group’ to show available Products with RRP’s
• Model, Use or Descriptive Word - Type into the Box and ‘Click’ ‘SEARCH’ This will list the ‘Groups’ to look in. ‘Clicking’ a ‘Group’ will show all available products in that group with RRP’s.
• ‘Go to’ under the Group or Product Description will link you to the Manufactures Specs.





]]> http://www.woodelectronics.co.nz/product-search/feed/ 0 http://www.woodelectronics.co.nz/knoll-product/ http://www.woodelectronics.co.nz/knoll-product/#comments Wed, 23 Mar 2005 18:23:54 +0000 robin http://www.planetav.co.nz/?p=21 4K and 6K
4K RRP $1699.95 inc GST
6K RRP TBA inc GST


4K = 8 Channel, 6K = 12 Channel High Current Amplifier
50 Watts per Channel

• 8 or 12 channels rated at 50 watts RMS per channel (100 watts peak).
• Individual and automatic channel resetting protection for low impedance, overheating, overloading, overvoltage and undervoltage.
• Two rack spaces (3-1/2″) with optional rack mount version.
• Individual level gain controls for all channels.
• Voltage trigger for remote turn on.
• Gold binding posts spaced for dual banana plugs.
• Electronic Link feature connects stereo inputs channel two through six to channel one.
• Side-mounted thermostatically controlled fan for internal cooling.

Unbelievable multi-channel power, performance and excellence at your fingertips!
The Knoll 4K and 6K multi-channel amplifier boasts advanced engineering, unique features, and tremendous value. Each channel delivers a heart pumping 50 watts RMS with 100-watt peak power. Each 4K and 6K channel is individually and fully protected against low impedance, overheating, overloading, overvoltage, and undervoltage. With the latest in circuit designs delivering more powerful sound quality, the 4K and 6K amplifier offers a quiet pop and click free platform that meets and exceeds the needs of the most demanding custom multi-zone systems.
The 4K and 6K also features individual channel gain adjustments, trigger (external) power on/off, gold input and output connectors and numerous other “installer friendly” items. This amplifier can be turned on and off from an external controller. Channel link allows the installer to link any or all of stereo channels two through four (left and right) without using Y cords or external adapters.
The upgraded circuitry permits a tighter, fuller bass with seriously improved treble or high end. The 4K and 6K are consistently spoken of as being very musical. The sonic characteristic of this amplifier is one of transparent vocals (not recessed into the background), pristine highs as well as bass with definition.
It’s time to hear the new multi-channel sound that is truly impressive in every room! Call your Knoll dealer to discuss the 4K and 6K amplifier enhancing your musical experience today!

Specifications:(4K)

Inputs Gold RCA jacks with adjustable gain
Input impedance 50k ohms
Outputs 5 way gold binding posts
Output power 50 watts RMS per channel (8 ohms)
Peak output power 100 watts per channel (8 ohms)
Ideal impedance 4 – 8 ohms
Frequency response 10 Hz – 40 kHz +/- 1dB (1w)
S/N ratio over 105 dB A weighted (50 watts)
THD distortion less than 0.1% 20 Hz to 20 kHz
IMD distortion less than 0.01% 60 Hz 7 kHz 4:1 (SMPTE)
Trigger control 12 VDC 35mA on 3.5mm mono jack
Dimensions 17″ x 3.5″ x 11.5″ (432 x 89 x 292mm)
Fan Noise quiet 28 dBA
Power 550 watts at 117 VAC or 230VAC
Weight 20 lbs (9 kg)
Note: Specifications subject to change without notice.

Rear View (6K):


Options:
Rack mount version for standard 19″ rack. Occupies two rack spaces and we strongly recommend blank spaces above and below for maximum power output.
A 12 channel version is available, Knoll model 6K.

MVP44a and MVP64a



Four Source, Four and Six Room Controller-Amplifers

The MVP44a and MVP64a features four / six deluxe digital volume controlled stereo amplifiers with individual four source selection. These features have been added to the awesomely reliable MR1250 50 watt per channel amplifier. It heralds a new era in multi-channel, high-quality power amplifiers. The MVP44a and MVP64a are designed to meet the amplifier needs of custom installed multi-zone systems where high quality sound is a specific requirement.
Extras such as an external voltage trigger that can turn source equipment on and off, individual volume, mute, bass, treble and balance controls give the MVP44a and MVP64a exceptional value when installed in homes and large complex systems. Except for the power button all controls are rear mounted. A data port is provided for ganging multiple MVP44a and MVP64a’s and external control of the MVP44a and MVP64a. Output ports are provided for connection to infrared controllers, so infrared signals can be relayed from the keypads to the source equipment.
The MVP44a and MVP64a are normally controlled by the MR60 keypad but it can also be controlled by an infrared receiver and RB8 remote control. The MR60 features all zone control of all off, all zones to source 1, 2, 3 or 4 (then set or reset all room volumes to 33 percent) and all zones volume up or down.
• Four input source selection. Each of the four or six stereo amplifiers are provided with four input source selection. Selection is made on the MR60 keypad(s), RB8 remote control or via an external controller. Rooms can have different source selections.
• Four or Six internal 76 position stereo volume controls. The six volume controls each require a MR60 keypad, RB8 remote control or external controller. The keypads are typically mounted in the room with the speakers and they control amplifier power on/off, volume up/down and mute as well as source selection.
• Cost and size efficiency. The MVP44a and MVP64a consists of a total of eight or twelve power amplifiers in one 3-1/2″ high enclosure (two rack spaces). Each power amplifier channel can deliver 50 watts RMS with peaks of 100 watts. Because of its unique design the MVP44a and MVP64a they deliver exceptional value.
• Automatic protection circuitry. Each MVP44a and MVP64a channel is individually and fully protected against low impedance, overheating, overloading, overvoltage and undervoltage. The protection circuitry automatically restores the amplifier channel as soon as its parameter returns to the safe operating area.
• Individual bass, treble and balance adjustment. Each channel features adjustments on the rear of the MVP44a and MVP64a so installers can preset the room for speaker differences and listener preferences.
• External trigger. The MVP44a and MVP64acan turn on and off source components with its 12vdc trigger output.
• All zone control. The MR60 features all zone control of all off, all zones to source 1, 2, 3 or 4 (then set volume at 1/3) and all zones volume up or down.
• MVP44a and MVP64a includes a quiet internal fan to increase its long-term power output capability.
• Infrared controller port. System commands generated from the MR60 keypads can automatically turn on and off source components as well as a limited number of functions such as play, skip, etc.
• Optional rack mount kit. Occupies two rack spaces.

Specifications:
Inputs 8 gold RCA jacks with adjustable gain
Input impedance 25k ohms
Outputs 5 way gold binding posts
Output power 50 watts RMS per channel (8 ohms)
Peak output power 100 watts per channel (8 ohms)
Ideal impedance 4 – 8 ohms
Frequency response 10 Hz – 40 kHz +/- 1dB (1w)
S/N ratio Over 105 dB A weighted (50 watts)
THD distortion Less than 0.1% 20 Hz to 20 kHz
IMD distortion Less than 0.01% 60 Hz 7 kHz 4:1 (SMPTE)
Trigger output 12 VDC on 3.5mm jack
Volume Adjustments 76 steps
Fan Noise Quiet 28 dBA
Source Selection 4 stereo inputs to 4 or 6 stereo outputs
Dimensions 17″ x 3.5″ x 11.5″ (432 x 89 x 292mm)
Power 750 watts at 117 VAC or 230VAC
Weight 21 lbs (9.5 kg)
Note: Specifications subject to change without notice.
Rear View:



Options:
MR60 keypads and RB8 remote control the MVP44a or MVP64a.
Each of the four or six stereo amplifiers in the MVP44a and MVP64a can be individually controlled (power on/off, volume up/down, mute and four input source selection) by the MR60. MR60 includes an infrared pass-through as well as complete control by the RB8 remote control. MR60 keypads are available with three different source selection legends (MR60a, MR60b and MR60c) and are available in white, ivory (bone) and almond colors. See the different MR60 keypad layouts.
DC100 Door Chime module. Connect up to three lighted door buttons (front, side and rear). Gives five different selectable chimes and overrides sound even if MVP64a in standby. Includes power supply.
MR171 Microphone paging module. Balanced microphone XLR input. Switchable phantom power. Uses contact closure or automatic sound detection for activation. Adjustable gain and activation sensitivity. Includes power supply.
MR173 Three zone infrared receiver converter. Converts Kn๖ll RB8 remote control commands in three different zones from an infrared receiver (no keypad required) to useable commands on the MVP64a without MR60 keypads. Infrared pass through is also active. Powered by the MVP64a.
RK1250 Rack mount kit for standard 19″ rack. Occupies two rack spaces. It is strongly recommend blank spaces above and below for maximum power output.
590-10 Xantech infrared sequencer. Converts the four or six output pulses from the MVP44a or MVP64a to useable infrared sequences. Turns on and off source equipment via IR and has four installer set function IR commands (CD play, tuner seek, etc.). Requires software program.

MVP44 PACK includes – MVP44a + 4 x MR60 Key Pads + 1 x RB8 Remote $3499.95 RRP inc GST
MVP64 PACK includes – MVP64a + 6 x MR60 Key Pads + 1 x RB8 Remote $3999.95 RRP inc GST

]]> http://www.woodelectronics.co.nz/knoll-product/feed/ 0 http://www.woodelectronics.co.nz/company/ http://www.woodelectronics.co.nz/company/#comments Thu, 24 Jun 2004 01:08:37 +0000 reganjcunliffe http://www.planetav.co.nz/?p=15 FORTY FIVE YEARS – Company Registered 29th August 1964

FORTY FIVE YEARS OF BRINGING TELEVISION, CAR & HOME AUDIO TO NEW ZEALANDERS



Wood Electronics Manufacturing / Marketing Ltd, formerly named La Wood Television / Wholesalers Ltd, was established in 1964 by Robin Wood (who continues in the position of Managing Director).

After twenty five years of designing, manufacturing and distributing television receivers, home radios / stereos and car radios / stereos (which included firsts like the only car radio cassette units to be designed and manufactured in New Zealand) the company’s direction changed to assembling car audio kit sets.

Brands of Car Audio assembled and marketed included Roadstar, Winstar, Fujitsu Ten, Freeway and Blaupunkt. The company was the first in New Zealand to assemble and market FM car stereos, autoreverse car radio cassettes, built in graphic equalisers and music search car cassette players, all Roadstar. This product was sold in quantity throughout New Zealand and installed on local assembly lines into many new vehicles.

With the introduction of sweeping import changes by the Government of the time, Wood Electronics Manufacturing Ltd was forced to close its factory with the loss of over fifty jobs and concentrate on importing and marketing of branded products. This included Blaupunkt Television, Video, Coach Equipment, after market and original equipment Car Audio so taking the German brand to a significant level in New Zealand.The parent company of Blaupunkt, Robert Bosch, took over their brand in 1995 and Wood Electronics Marketing Ltd then became the sole New Zealand agent for Clarion Car, Coach and Marine Audio / TV at the same time increasing it’s involvement with the USA company Cerwin – Vega, manufacturers of Speakers for Car, Home and Professional / Commercial use.

Auckland based Wood Electronics Marketing Ltd holds a wide range of spare parts and has a service facility to support all products presently imported by it including the repairing of Cerwin – Vega speakers.

Wood Electronics Marketing Ltd is proud of its forty five year history as the longest established, locally owned and operated company, supplying Car Audio to the New Zealand market. Our staff have always been well experienced and eager to assist with advice and technical support when required in this ever evolving industry.

On 28th February 2009 Wood Electronics moved out of it’s premises in Asquith Ave and basically closed the doors on business having leased the building to an Australian Clothing company. It was time to retire and exit the industry. Now in a small building in Henderson I, Robin Wood have no staff and am for the next little while tiding up loose ends and pondering what I may do over the next few years.

]]> http://www.woodelectronics.co.nz/company/feed/ 0 http://www.woodelectronics.co.nz/dealers-7/ http://www.woodelectronics.co.nz/dealers-7/#comments Sun, 25 Apr 2004 02:50:02 +0000 reganjcunliffe http://www.woodelectronics.co.nz/dealers-7/

Click on the map of New Zealand to see one of our top dealers in your area:



• CODES

Timaru

Wanaka

Cromwell

Dunedin

Invercargill

]]> http://www.woodelectronics.co.nz/dealers-7/feed/ 0 http://www.woodelectronics.co.nz/dealers-6/ http://www.woodelectronics.co.nz/dealers-6/#comments Sun, 25 Apr 2004 02:38:51 +0000 reganjcunliffe http://www.planetav.co.nz/?p=10

Click on the map of New Zealand to see one of our top dealers in your area:



• CODES

Greymouth

Hokitika

Christchurch

Ashburton

]]> http://www.woodelectronics.co.nz/dealers-6/feed/ 0